Vigiguard Automatic Boom Barriers
Vigiguard Automatic Boom Barriers offer efficient security at exit and entry points of factories, office complexes, condominiums, parking lots, toll plazas, or any roadway entry where medium to heavy traffic is expected. The boom barrier is aesthetically designed with sleek and modern looks.
Features of the boom barrier include an inbuilt anti-crush safety device, which suspends the motion of the boom, should it meet any obstruction. Optional beam sensor provides further protection to vehicles. Auto-close of the boom barrier can be programmed through the controller. Duration of fast and slow speeds is programmed at the time of installation, according to the length of the boom and frequency of traffic expected.
However its electronic control panel is designed to accept signals from various controls and safety accessories.
All these features make VIGIGUARD automatic boom barrier the best in class entrance control equipment for your safety.
Optional Accessories:
High torque motor: Long lasting motor that generates up to 600Nm torque. |
Smooth operation: No bounce/jerk of boom at end positions. |
Better visibility: White aluminum boom bar with reflective strips and RAL 2005 powder coated housing. |
IP54 protection: Control unit is IP – protected making it dust and water resistant. |
Optical beam sensor: Safety device to detect presence of vehicles and reversal of boom movement. |
Access control operation: Boom barrier operated through push button switch and can also be operated through access control system. |
Manual operation in case of power failure: Barrier can be raised or lowered by releasing the boom lock with key type mechanism. |
Applications: Tolls, parking areas, industries, private & govt. assets, residential areas, airports etc. |
Specification | ||
Model number | G4000 | G6000 |
| Boom Length (mt) | 4.00 | 6.00 |
| Height of Boom from ground | 884 | 914 (Approx mm) |
| Housing Dimensions (Approx mm) | 260 x 270 x 1007 | 450 x 295 x 1007 |
| Boom Dimension (mm) | 60 x 40 | 100 x 40 |
| Controller Protecting Rating | IP54 | IP54 |
| Control Panel Power Supply (V) | 230 A.C.50/60Hz | 230 A.C.50/60Hz |
| Motor Power Supply (V) | 24 D.C | 24 D.C |
| Power (W) | 300 | 300 |
| Current Draw (A) | 1.5 | 1.5 |
| Torque (Nm) | 200 | 600 |
| Opening Time (Sec) | 2 to 6 | 3 to 6 |
| Duty Cycle | Intensive use | Intensive use |
| Operating Temp. (°C) | -20 to +55 | -20 to +55 |
Vigiguard Flap Barriers
Ensuring security and crowd management at the entrance in areas with high pedestrian flow is a challenging task. To make this difficult task easier, Godrej Security Solutions presents VigiGuard Flap Barrier.
Designed for pedestrian entrance control, it helps to control and secure access, allowing only one person through at a time.
APPLICATIONS:
Works for indoor applications like office and admin buildings, IT parks, large business facilities, industrial areas, etc.
Brushless DC motor enabling high reliability and long lasting performance |
Energy efficient, consumes power upto 80W |
Safety sensor prevents closing of flaps, ensuring pedestrian safety |
Better aesthetic with granite finish panel on the top and no sharp edges |
Flap material: acrylic |
Tail gating alert |
Bi-directional operation can be used for both entry & exit |
Configuration to single and multiple lanes enables efficient use of space |
Lane indicator displays whether passage is barred or free |
Housing material: mild steel powder coated or Stainless Steel grade 304 or optional Stainless Steel grade 316 |
Integration with access control device |
Parameters Tail gating detection system | Standard Lane (GFB-M1,S1) | Wide lane (GFB-M1,S2) |
| Operating Time (sec) | 0.5 | 0.5 |
| Height (approx. mm) | 1000 | 1000 |
| Length (approx. mm) | 1110 | 1110 |
| Width (approx. mm) | 250 | 450 |
| Power Supply (VAC) | 230 | 230 |
| Passage Clearance (mm) | 520 | 900 |
| Motor | 24V DC | 24V DC |
| Duty Cycle | Intensive Use | Intensive Use |
*All dimensions are in mm and approx.
Vigiguard Plus Tripod Turnstile
Be it an IT park, sports stadium, railway station or passenger terminal, crowd management is of utmost importance across all these venues. Godrej VigiGuard Plus Tripod Turnstiles are suitable for integration into any modern-day fare collection system and can be installed at any mass transit station. Moreover, the ‘alarm’ feature of the tripod provides best security and prevents unauthorized access point.
Application: Airports , BRTS , Metro
| Drive unit | Electro-mechanical push type |
| Mechanism |
|
| Cabinet | Stainless steel tube AISI 304 with 3x 120 deg stainless steel rotating arm |
| Barrier arm | Ø 38 mm |
| Passage walkway | 500mm arm length with minimum 550 mm walkway |
| Pass speed | 40-45 person per minute |
| Power | 230V AC, 50hz |
| LED indicators | RED/Green indicators |
| Dimensions | 260x1030x1140 (WxHxL) mm approx.. |
| Temperature | 0 to 50deg C |
| Barrier operation | Push type |
| Inputs | Fire alarm, access control integration |
| Power consumption | Less than 100 Watts |
| MCBF | 7 million cycle under normally closed condition |
| Duty Cycle | 100% Intensive use |
| Design | Elegant and Ergonomic Design |
| Safety |
|
| Validator Placement | Mounting provision available |
| Interface | 4 output controller for easy validator integration |
| IP rating | IP54 rated |
| Humidity | 0 ~95% RH non-condensing |
Tyre Killer
Tyre Killer is an electro hydraulically operated heavy duty spike barrier which rises above the ground level on giving a valid input signal and thus prevents unauthorized intrusions at entry/exit points of high security premises.
When the tyre killer is in a lowered position the vehicles can pass through, thereby providing a good enhanced security blockage system.
The housing and the blocking element of the Tyre Killer are designed in full core steel profile construction with TESCON 4S Coating, ensuring maximum safety against corrosion. The impact face of the Tyre Killer is impact resisting thick, sharp steel spikes to puncture the tyre and in fact are strong enough to break the axle of the vehicle. It transfers mechanical forces to reinforced concrete
TECHNOLOGY
The tyre killer is operated by high speed hydraulic cylinders. A power pack containing an electric motor – pump assembly and an accumulator/handle for manual operation(in case of power failure) is installed up to a distance of 20 meters from the tyre killer in an all weatherproof lockable steel casing on a concrete base.
The operation time for up & down movement of the tyre killer varies from 2-6 seconds.
Blocking Width of the tyre killer : From 2.00 m to 6.00 m |
Blocking Height : Heavy-duty steel spike barrier, 475 mm high |
Electro-Hydraulic Drive Unit: Integrated within underground casing or separately inside lockable steel cabinet for outdoor installation max. 20 m distance from tyre killer |
Vigiguard Full Height Turnstile
Ensuring security and crowd management at the entrance in areas which need high security, and have high pedestrian flow is a challenging task. To make this difficult task easier, Godrej Security Solutions presents VigiGuard Full Height Turnstile Gates. Designed for pedestrian entrance control at high security areas, these turnstile gates have revolving doors which help regulate pedestrian flow.
VigiGuard turnstile gate is available in dual and single lane models, turnstile gate’s sturdy structure and design, make it a sure deterrent.
Dual Lane Model Numbers: GFHT-M2, GFHT-S2
Single Lane Model Numbers: GFHT-M1, GFHT-S1
APPLICATIONS:
Vigiguard Full Height Turnstile Gates are a must at high security areas like large business facilities, Government assets, stadiums, research labs, etc.
Optional Accessories:
*All dimensions are in mm and approx.
Electromechanical drive mechanism. |
4 section rotor at 90deg to prevent two passages at one time. |
Bi-directional passage control. |
Hexagonally designed drive mechanism housing, for better aesthetic with built in lane indicators. |
Power supply: 230V AC, 50Hz, single phase |
Energy efficient: Consumes power approx. 60W (single lane) |
Housing material: Mild steel powder coated or stainless steel grade 304, with stainless steel rotor and bars. |
Self-centering hydraulic damping mechanism, for smooth and complete rotation of turnstile gate |
Integration with access control device. |
| Type | Model (GFHT-S1, M1) | Model (GFHT-S2, M2) |
| Lane | Single lane | Dual lane |
| Height (approx. mm) | 2212 | 2212 |
| Length (approx. mm) | 1500 | 1500 |
| Width (approx. mm) | 1500 | 1500 |
| Passage clearance (approx. mm) | 530 | 530 |
| Power supply (VAC) | 230 +-10% | 230 +-10% |
| Rotor | 4×90 deg stop | 4×90 deg stop |
| Duty cycle | Intensive Use | Intensive Use |
Blocking Bollards
Electro-hydraulically power operated, our security bollards come in single or multiple units with a common drive unit. The standard blocking height above surface level ranges between 600 mm to 850 mm. Aesthetically designed in different shapes and colours, this range of security bollards is ideal for pedestrian zones in the city, fuel pumps as well as for security purposes in front of important buildings
Electro-hydraulically power operated bollards |
Single or multiple units in row with one common drive unit |
Standard blocking height above surface level 600mm to 850mm |
Different shapes and design of the raising element |
Areas of application of security bollards are pedestrian zones in city centers, fuel stations or for security purposes in front of prestigious buildings. |